Name: RCI Offroad Engine Skid Plate For 2021+ Bronco
Brand: ExtrailAuto
SKU: rci-offroad-engine-skid-plate-2021-present-bronco
Availability: InStock

Home Store

RCI Offroad Engine Skid Plate For 2021+ Bronco

Select Material

From $121.20

Original: $404.00

-70%

RCI Offroad Engine Skid Plate For 2021+ Bronco—

$404.00

$121.20

Select Material

From $121.20

Original: $404.00

-70%

RCI Offroad Engine Skid Plate For 2021+ Bronco—

$404.00

$121.20

The Story

RCI Offroad Engine Skid Plate | 2021-Present Bronco

6-Point Mounting. EPAS Steering Defense. 100% Bolt-On Installation.

The Ultimate Front-End Defense for Your Bronco

Whether you’re sliding over jagged rocks or hitting a surprisingly deep pothole on the way to the job site, many of your 2021-Present Bronco's most expensive components are completely exposed. From the oil pan to the notoriously fragile power steering unit, underbody damage is a costly reality for the unprotected.

Protect your investment with RCI Offroad, the ultimate defense for all on and off-road hazards. This engine skid plate is engineered to provide massive coverage without sacrificing ground clearance. Proudly Made in the USA, it features a 2-piece modular design for easy maintenance and maximum structural integrity.

The Problem & The Solution:

The Pain: The Bronco's EPAS power steering unit is positioned low and is extremely expensive to replace ($2,500+). Factory "shields" often fail under real impact.
The RCI Solution: We use a heavy-duty 6-point mounting system and premium 3/16" Steel or 1/4" Aluminum to create a smooth, flat surface that slides over obstacles while fully shielding your steering and drivetrain.

RCI Offroad Engine Skid Plate Installed on Ford Bronco Front End

Key Features: Bronco Engine Armor

No Drilling Required

The RCI Engine Skid is a 100% bolt-on assembly. It utilizes existing factory mounting points, meaning no permanent vehicle modifications are needed.

Bumper Compatibility

Thoughtfully designed to work seamlessly with Ford's Plastic, Capable, and Modular front bumpers without interference.

EPAS Protection

Specially shaped to protect the expensive EPAS power steering unit, front differential, and intercooler from direct impact.

6-Point Attachment

Features 6 reinforced mounting points for ultimate durability, ensuring the plate stays secure during heavy trail abuse.

Modular 2-Piece Design

The split-plate design allows for easier installation and simple removal of subsections for routine maintenance and oil changes.

Superior Clearance

Hugs the chassis extremely tight to maximize ground clearance. The smooth surface helps the Bronco slide over obstacles.

Steel or Aluminum

Choose 3/16" Steel for hardcore rock crawling or 1/4" Aluminum for a lightweight, rust-proof solution with a high strength-to-weight ratio.

American Made

Proudly manufactured in the USA with precision CNC laser cutting and heavy-duty epoxy powder coating.

Built for Performance and Protection

RCI Offroad skids are more than just metal plates; they are precision-engineered insurance for your Bronco. By mounting directly to the OEM frame brackets, this skid does not impair the installation of aftermarket bumpers or winches, making it the perfect foundation for any build.

~40 lbs

Manageable Weight

3/16"

Steel Thickness

1/4"

Aluminum Thickness

Mounting Points

RCI Bronco Engine Skid Plate Components Close Up

Real Owner Feedback ★★★★★

"The quality is night and day compared to the factory plates. I opted for the 1/4" aluminum to keep my front-end weight down while still getting real protection. Installation was a breeze—everything lined up perfectly with the factory holes. I feel much better knowing my steering unit isn't just one rock away from a $2k repair."

- Derek L., 2023 Bronco Badlands Owner

Fitment & Compatibility Note

Check Your Trim: This engine skid plate is compatible with both 2-door and 4-door standard Bronco models. It is NOT compatible with Bronco Raptor or Bronco Sport models. Compatibility with lift kits over 4" has not been verified.

Investment vs. Repair Cost Reality Check

$2,500+

EPAS Steering Unit

$1,200+

Front Diff / Cross-member

$800+

Intercooler / Oil Pan

One-Time

RCI Engine Skid Investment

*Estimated costs for parts and labor at Ford dealership rates. Trail damage is typically not covered by warranty.

Why RCI Offroad Engine Skids?

Feature	RCI Offroad Skid	Factory Bronco "Shield"
Protection Points	✓ Engine, EPAS, Diff, Intercooler	✗ Partial Coverage Only
Mounting Support	✓ Heavy-Duty 6-Point System	✗ Standard 4-Point
Material Thickness	✓ 3/16" Steel / 1/4" Aluminum	✗ Thin Stamped Metal / Plastic
Bumper Fitment	✓ Plastic, Capable, & Modular	OEM Specific Only
Origin	✓ Made in USA	Mass Produced

Fitment: 2021+ Bronco

Specifically CAD-designed for the Gen 6 Bronco underbody. This plate provides total peace of mind for:

Daily Driving

Hardcore Rock Crawling

Long-Distance Overlanding

Serviceability: Includes precision-cut access points for maintenance, ensuring you don't have to wrestle with your armor during every oil change.

RCI Bronco Engine Skid Plate Underside View Full Armor

Package Includes Everything for Install

2-Piece Engine Skid Plate
Front and mid sections included

Premium Hardware Kit
All grade 8/10.9 bolts & washers

Step-By-Step Instructions
Easy home-garage installation guide

Powder Coated Finish
Rust-resistant epoxy coating

CA Residents: ⚠️ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Frequently Asked Questions

+ Will this fit my Bronco Raptor or Bronco Sport?

No. The Raptor has a wider chassis and different suspension components, and the Bronco Sport is based on a unibody platform. This skid plate is designed specifically for the standard 2-door and 4-door Ford Bronco.

+ What material should I choose: Steel or Aluminum?

3/16" Steel is recommended for heavy rock crawling where the plate will take frequent high-impact hits. 1/4" Aluminum is ideal for daily driving, overlanding, and moderate trails where you want lightweight, rust-proof protection without stressing your suspension.

+ Is drilling required for installation?

No drilling is required. The RCI Engine Skid Plate uses 100% bolt-on installation, utilizing existing factory frame holes and brackets for a perfect fit every time.

+ Can I still use my factory bumper?

Yes. This skid plate is fully compatible with the Plastic, Capable, and Modular front bumpers. It mounts behind the bumper line and does not interfere with factory or aftermarket bumper installation.

+ Does this make it harder to change my oil?

The 2-piece modular design is intended to make maintenance easier. You can remove individual sections to gain access to the engine bay or drain plugs without having to drop the entire armor system.

```